Configuration

MAKCU Settings

Configure and interact with your MAKCU device via WebSerial connection.

MAKCU Status

MAKCU Status

MAKCU status : Disconnected

Prerequisites

  • MAKCU flashed with 3.9 firmware

    The settings page requires firmware version 3.9 or later

  • USB 1 connected to your gaming PC

    USB 1 must be connected to your gaming PC

  • USB 2 connected to this PC

    USB 2 must be connected to the same computer. Otherwise, MAKCU is not functional.

Note: If you encounter connection issues, please see the troubleshooting page for detailed setup instructions. troubleshooting page

Baud Rate

Ensure makcu is configured with 115200 baud rate to use the settings, otherwise makcu will fail to function

Please refer to the setup page for detailed information on baud rate configuration.